Posts Tagged ‘Magnetic Separation’

Focus on Metal Recovery at RWM 2019

The focus on the Bunting stand at RWM 2019 (11 & 12 September, NEC, Birmingham, UK) is recovering and separating metals from secondary ‘waste’ materials.  Working production-sized metal separators separating metals are on display on stand P1, right by the entrance to the show. Recycling has never had a higher profile.  The ongoing backlash against single-use…

Read More

Ceramics UK 2019 Show Success

Ceramics UK 2019

The last UK-based ceramics focused exhibition was staged in Telford, UK over twenty years ago.  In July 2019, once again in Telford, the new Ceramics UK show once again thrust ceramics into the spotlight, providing the perfect showcase for the sector.  Ceramics UK was co-located in Telford, UK with The Advanced Materials Show. Over twenty…

Read More

Getting Metal Out of Ceramic Sanitaryware

sanitaryware Blog

Sanitaryware is a commonly used term in the ceramics industry referring to sanitary appliances found in toilets and bathrooms.  Traditionally, WC bowls, cisterns, bidets, urinals and washbasins are made from porcelain (a ceramic material made from clay that might be described as ‘vitreous china’ when coated with enamel).  This might be referred to as ceramic,…

Read More

Magnetic Separators and Metal Detectors at VICTAM 2019

Grate magnet

Metal contamination is a common problem in the animal feed and grain industries.  Practical and proven solutions will feature on stand A029 at the VICTAM International 2019 exhibition (Cologne, Germany June 12 – 14).  The range of Master Magnets and Bunting Magnetic Separators and Metal Detectors both identify and capture problematic metal that is potentially…

Read More

Detecting and Removing Tramp Metal from Conveyors

Metal Detector

The process of quarrying aggregate and mining ore often results in the introduction of tramp metal.  The effective detection and removal of this tramp metal is critical to prevent damage to crushers, screens and conveyors, and is achieved using metal detectors and magnetic separators. The design of metal detector or magnetic separator is dependent upon…

Read More

New Export Opportunities at Bauma 2019

Magnetic separator conveyor

Throughout the whole 7 days, the Master Magnets and Bunting Magnetics stand at Bauma 2019 buzzed with visitors.  Mineral separation demonstrations on the Rare Earth Roll Magnetic Separator ignited curiosity and stimulated questions.  The new ElectroMax Overband Magnet, proudly displayed at the front of the stand, drew visitors and the media.  There was particular interest…

Read More

ElectroMax Overband Magnet Launched At Bauma

ElectroMax Suspension Magnet

Master Magnets ElectroMax Overband Magnet at Bauma Master Magnets is launching a new low-profile Electro Overband Magnet called the ‘ElectroMax’ at Bauma 2019 (Munich, Germany 8-14 April, 2019 – Stand 133 in Hall B2).  The ElectroMax range is 185% stronger than equivalent Permanent Overband Magnets and also 25% lighter.  The development in response to customer’s…

Read More

Technical Video Explanation of Rare Earth Roll Separator

magnetic conveyor pulleys

The Rare Earth Roll Separator or Masteroll is the world’s most popular magnetic separator used by mineral processors to separate paramagnetic minerals from dry materials.  The Rare Earth Roll Separator is simple to install and use, whilst being exceptionally energy-efficient.  The high-intensity magnetic strength enables the separation of very weakly magnetic minerals such as mica (biotite…

Read More

Mineral Processing & Magnetic Separators, Bauma 2019

eddy current systems

The latest generation of high intensity Magnetic Separators will be on display on the Bunting Magnetics and Master Magnets stand (Hall B2 Stand 133) at Bauma 2019.  The metal and mineral separators are used widely in the mineral processing, quarrying and recycling industries.  Also, a new design of Magnetic Separator is being launched at the…

Read More

Large Pulley Magnets for Mining Project

magnetic conveyor pulleys

Two 1.2 metre diameter Pulley Magnets have been manufactured and supplied to a mining operation in Sweden.  The Pulley Magnets are used to extract large tramp metal from iron ore prior to crushing and screening.  Removing the tramp metal protects the other processing equipment and prevents damage to conveyors.  The mining operation originally purchased three…

Read More