Posts Tagged ‘Exhibition’

Metal Separation Attracts Visitors at RWM19

Visitors to RWM19 heard and then saw metal being separated on Bunting’s stand P1 as soon as they walked into the show. “Visitors to the RWM19 exhibition wanted to see equipment in action. The clattering noise of separating metal was enough to ignite their imagination and draw them to the stand,” explained Adrian Coleman, the…

Read More

Focus on Metal Recovery at RWM 2019

The focus on the Bunting stand at RWM 2019 (11 & 12 September, NEC, Birmingham, UK) is recovering and separating metals from secondary ‘waste’ materials.  Working production-sized metal separators separating metals are on display on stand P1, right by the entrance to the show. Recycling has never had a higher profile.  The ongoing backlash against single-use…

Read More

Iron Separation Technology at Ceramics UK Show

Electro magnetic filter

Successfully removing fine iron from ceramic slips and glazes is vitally important in any ceramics plant.  Such iron contamination is removed using high intensity magnetic separators like those on display on the Bunting and Master Magnets stand 1517 at the Ceramics UK show (10-11 July 2019, Telford, United Kingdom). Iron contamination causes surface defects (black…

Read More

Magnetic Separators and Metal Detectors at VICTAM 2019

Grate magnet

Metal contamination is a common problem in the animal feed and grain industries.  Practical and proven solutions will feature on stand A029 at the VICTAM International 2019 exhibition (Cologne, Germany June 12 – 14).  The range of Master Magnets and Bunting Magnetic Separators and Metal Detectors both identify and capture problematic metal that is potentially…

Read More

New Export Opportunities at Bauma 2019

Magnetic separator conveyor

Throughout the whole 7 days, the Master Magnets and Bunting Magnetics stand at Bauma 2019 buzzed with visitors.  Mineral separation demonstrations on the Rare Earth Roll Magnetic Separator ignited curiosity and stimulated questions.  The new ElectroMax Overband Magnet, proudly displayed at the front of the stand, drew visitors and the media.  There was particular interest…

Read More

Mineral Processing & Magnetic Separators, Bauma 2019

eddy current systems

The latest generation of high intensity Magnetic Separators will be on display on the Bunting Magnetics and Master Magnets stand (Hall B2 Stand 133) at Bauma 2019.  The metal and mineral separators are used widely in the mineral processing, quarrying and recycling industries.  Also, a new design of Magnetic Separator is being launched at the…

Read More

2018 Review

Magnets UK

A Look Back at our News & Blogs in 2018 2018 proved to be another exciting year.  Despite the spectre of BREXIT, business overseas continued to flourish and grow.  We attended a number of international exhibitions, securing orders on the stand.  There have also been concerns on the UK mainland about waste management and especially…

Read More

Demonstrations Attract Visitors at RWM18

Magnetic Separation Equipment RWM

When visitors entered the main hall at this year’s RWM Exhibition, their attention was immediately drawn to Metal Separation equipment operating on the Master Magnets and Bunting Magnetics Europe stand.  The stand was the largest exhibiting Magnetic Separators and Eddy Current Separators at the show. “With our stand being in prime position as visitors entered…

Read More

3 UK Waste Recycling Facts

Recyling Facts

Latest 2016 Waste Recycling DEFRA Data The UK’s largest recycling exhibition, RWM, takes place on the 12th and 13th September 2018 (NEC, Birmingham, UK).  Leading up to the show, we wanted to review three key facts from the latest DEFRA data on waste and recycling, published in February 2018 and reviewing information from 2016 (the…

Read More

Metal Separation Test Centre at RWM

metal separation ‌cars 2018

“Our stand is one of the first visitors to RWM will see and we want them to be involved in the show straight away,” explained Jonathan Millington, Master Magnets Marketing Manager.  Visitors to RWM (12-13 September, 2018, NEC, Birmingham, UK) will be invited onto stand 5Q11 to place a lump of non-ferrous metal or stainless steel…

Read More