Metal Detector
Three High Sensitivity Metal Detectors for Nappies
An Egyptian paper mill has purchased three meTRON 07 CI Metal Detectors mounted on conveyors to detect metal in the tissue paper used as the filler in the manufacture of baby’s disposable nappies. The three meTRON Metal Detectors are identical in size and specification. Each has a 400mm wide belt passing through a 450mm wide…
Read MoreMetal Separator Locations in a Plastics Plant
Determining the best location to remove metal in a Plastics Processing plant can be difficult. To assist plastics engineers, Bunting has released a Typical Plant Flowsheet showing optimum locations for metal separators. This blog focuses on the locations, designs and types of Magnetic Separator and Metal Detector commonly used in plastics plants. A Typical Flowsheet On the flowsheet, the…
Read MoreMetal Separation Attracts Visitors at RWM19
Visitors to RWM19 heard and then saw metal being separated on Bunting’s stand P1 as soon as they walked into the show. “Visitors to the RWM19 exhibition wanted to see equipment in action. The clattering noise of separating metal was enough to ignite their imagination and draw them to the stand,” explained Adrian Coleman, the…
Read MoreFocus on Metal Recovery at RWM 2019
The focus on the Bunting stand at RWM 2019 (11 & 12 September, NEC, Birmingham, UK) is recovering and separating metals from secondary ‘waste’ materials. Working production-sized metal separators separating metals are on display on stand P1, right by the entrance to the show. Recycling has never had a higher profile. The ongoing backlash against single-use…
Read MoreAmerican Quarries Install TN77 Metal Detectors
TN77 Metal Detectors are proving popular with quarry operators in the USA. The ‘Metal Detection‘ branded equipment is used to identify tramp metal in conveyed aggregate and prevent damage to screens and crushers. The TN77 metal detector is a tunnel-type Metal Detector used widely in the quarrying, mining and recycling industries where the conveyed material…
Read MoreDetecting and Removing Tramp Metal from Conveyors
The process of quarrying aggregate and mining ore often results in the introduction of tramp metal. The effective detection and removal of this tramp metal is critical to prevent damage to crushers, screens and conveyors, and is achieved using metal detectors and magnetic separators. The design of metal detector or magnetic separator is dependent upon…
Read MoreNew Export Opportunities at Bauma 2019
Throughout the whole 7 days, the Master Magnets and Bunting Magnetics stand at Bauma 2019 buzzed with visitors. Mineral separation demonstrations on the Rare Earth Roll Magnetic Separator ignited curiosity and stimulated questions. The new ElectroMax Overband Magnet, proudly displayed at the front of the stand, drew visitors and the media. There was particular interest…
Read MoreTwo High Sensitivity Metal Detectors For Immediate Sale
We presently have two high sensitivity Metal Detectors in stock ready for immediate sale. This design of Metal Detector offers complete protection against metal contamination in high risk products such as food (both loose and packaged) and pharmaceuticals. Both available Metal Detectors are the model MDE-C. “C” stands for the compact range, which has an all-in-one…
Read MoreMineral Processing & Magnetic Separators, Bauma 2019
The latest generation of high intensity Magnetic Separators will be on display on the Bunting Magnetics and Master Magnets stand (Hall B2 Stand 133) at Bauma 2019. The metal and mineral separators are used widely in the mineral processing, quarrying and recycling industries. Also, a new design of Magnetic Separator is being launched at the…
Read More3 Exhibitions In 3 Weeks
After exhibiting at 3 trade shows in 3 weeks, we review each show and question whether there needs to be better planning of major trade exhibitions in the UK. Hillhead 2018 (26th to 28th June 2018) The 3-day show, in a quarry just outside Buxton, Derbyshire, UK, focuses on the quarry, aggregate, mining and recycling…
Read More