+44 (0) 1527 -65858

Electro Suspension Magnet

Metal Separation Attracts Visitors at RWM19

Bunting at RWM '19

Visitors to RWM19 heard and then saw metal being separated on Bunting’s stand P1 as soon as they walked into the show. “Visitors to the RWM19 exhibition wanted to see equipment in action. The clattering noise of separating metal was enough to ignite their imagination and draw them to the stand,” explained Adrian Coleman, the…

Read More

Focus on Metal Recovery at RWM 2019

Bunting Master Magnets at RWM '17

The focus on the Bunting stand at RWM 2019 (11 & 12 September, NEC, Birmingham, UK) is recovering and separating metals from secondary ‘waste’ materials.  Working production-sized metal separators separating metals are on display on stand P1, right by the entrance to the show. Recycling has never had a higher profile.  The ongoing backlash against single-use…

Read More

ElectroMax Overband Magnet Launched At Bauma

ElectroMax Suspension Magnet

Master Magnets ElectroMax Overband Magnet at Bauma Master Magnets is launching a new low-profile Electro Overband Magnet called the ‘ElectroMax’ at Bauma 2019 (Munich, Germany 8-14 April, 2019 – Stand 133 in Hall B2).  The ElectroMax range is 185% stronger than equivalent Permanent Overband Magnets and also 25% lighter.  The development in response to customer’s…

Read More

2018 Review

Magnets UK

A Look Back at our News & Blogs in 2018 2018 proved to be another exciting year.  Despite the spectre of BREXIT, business overseas continued to flourish and grow.  We attended a number of international exhibitions, securing orders on the stand.  There have also been concerns on the UK mainland about waste management and especially…

Read More

Electro Overband Magnet Selection

magnetic roll

The range of Master Magnets’ Electro Overband Magnets is extensive.  Selecting the optimum design of Electro Overband Magnet to perform a specific separation task is critical.  Poor magnet selection could result in damage to processing equipment or a reduction in product quality.  To aid the correct selection, Master Magnets applications engineers have developed a bespoke ‘Electro…

Read More

Electro Overband Magnet Removes Metal from Copper Ore

metal separation ‌ ‌

The photograph shows a large self-cleaning Electro Overband Magnet packed and ready for despatch to a copper ore mine in Bulgaria.  This is the third Electro Overband Magnet purchased by the mine to remove tramp ferrous metal from the crushed ore. The Application The mine is installing the Electro Overband Magnet to remove tramp ferrous metal…

Read More

Electro Suspension Magnets at West Burton Power Station

Suspension Magnets

Two (2) Master Magnets Oil Cooled In-Line Electro Suspension Magnets at the coal-fired West Burton Power Station located on the River Trent near Gainsborough, Lincolnshire, UK.  The Electro Suspension Magnets remove tramp metal contamination from the coal to prevent damage to processing equipment and conveyor belts. Alstom Power employs some 3,500 people in the UK…

Read More

Master Magnets Electro Suspension Magnet Still Going Strong!

Electro Magnet

Master Magnets was contacted by a customer whose transformer rectifier for their Electro Suspension Magnet had failed.  Alarmed at the failure, we checked through our project records.  After some searching, we discovered that the Electro Suspension Magnet had been originally supplied in 1989.  It was actually older than some of our staff! The customer was…

Read More

10 Tonne Master Magnets Overbands – Russia

10 Tonne Overband Magnet

Magnetic Separation is a key stage of any screening, crushing and sorting plant and MK Vega-Po LLC (“Radex”), of St Petersburg in Russia, purchased six (6) Electro Overband Magnets from Master Magnets for their coastal coal processing complex in Nakhodka on the Trudny Peninsula, approximately 85km (53 miles) east of Vladivostok in Russia. Development of…

Read More

Electro Overband Magnets Protect Waste Shredders

Magnetic Pulley

Recovering Ferrous Metals from waste product streams is a vital part of any recycling process. Many of UKs recycling centres are focused on upgrading their metal separation equipment to reduce landfill and thus costs, and to protect any downstream processing equipment from large damaging metals. Ferrous Metal Causes Costly Damage In one recycling project, a…

Read More