Master Magnets Review ‘The Best Hillhead Show Yet’

Master Magnets recently took part in their 8th consecutive Hillhead exhibition. The show, which is widely recognised as being the largest working quarry trade exhibition, provided a record number of enquiries over the three days and with help from glorious sunshine, the show seemed busier than ever. The range of Magnetic Separators and Metal Detection Systems on the stand attracted lots of interest from the visitors. The Suspension Magnet, which was shown lifting a 15kg digger tooth, was particularly eye-catching and proved to be a great talking point for many of the passersby. The Master more

Read More

Hillhead 2014 Fast Approaching

Mastermag will be demonstrating a range of equipment at their 8th consecutive Hillhead show this year. The world’s largest working quarry trade exhibition saw visitor numbers exceed 15,000 in the 2012 show and with over 400 exhibitors due to take part this year, this is sure to be achieved again. A range of Magnetic Separation and Industrial Metal Detection solutions will be displayed on stand C9 this year, which will include a self-cleaning Overband Magnet and a Permanent Suspension Magnet. Overband Separators are very cost effective solutions that are commonly used for the continuous more

Read More

Master Magnets Showcase Recycling Magnet Range At IFAT 2014

As part of Master Magnets business exhibition schedule, last month saw Master Magnets take part at the world renowned IFAT tradeshow to demonstrate a range of magnetic sorting equipment. Hoping to capitalise on the growing European recycling market, Master Magnets knew that IFAT would be a great platform to promote the company’s products and services. As one of the largest international recycling and waste management tradeshows, IFAT hosted almost 3000 exhibitors from over 50 countries and was able to attract a huge number of visitors over the 5 days. The Eccentric Eddy Current Separator more

Read More

Magnets Attract Foodex Visitors

Last month’s Foodex show, which took place at the Birmingham NEC, welcomed many visitors from across the UK and the Mastermag range of food-grade equipment was grabbing lots of attention from the crowds. Master Magnets manufactures a wide range of magnetic processing equipment, specifically designed for the removal of ferrous contaminants from food stuffs. Manufactured in 304 stainless steel, the equipment is constructed using the highest grade of Neodymium Iron Boron magnetic material to ensure safe removal of fine ferrous particles. On the stand, the mirror-polished magnetic more

Read More

Plans Well Underway For IFAT 2014

This year, as part of Master Magnet’s busy exhibition schedule, the company will be demonstrating its range of magnetic separation and metal detection equipment at IFAT 2014. Taking place in Munich from the 5th to the 9th of May, IFAT is one of the largest international recycling and waste management tradeshows, hosting almost 3000 exhibitors from over 50 countries. Master Magnets will be demonstrating an Eccentric Eddy Current Separator and an Overband Magnet on stand C1-527. Overband magnets have become the industry standard for Tramp Iron removal from conveyed material and Master more

Read More

Master Magnets look ahead to Foodex 2014

Master Magnets Ltd are looking forward to what we hope will be a very busy 2014. With exhibitions planned for March, May, June and September, our Sales team will have a great number of opportunities to meet with lots of new and existing customers. Master Magnets Incorporating Metal Detection Ltd specialises in the manufacture of industrial detection and separation systems. Their wide range of products can be applied to many industries from Mining and Quarrying to Recycling and Food Processing for the efficient removal of metallic contamination. The food processing industry provides the most more

Read More

RWM – The Future Looks Bright For UK Recycling

The Recycling and Waste Management industry is one of the fastest growing markets across Europe and is also becoming a priority in many of the emerging nations that are now being driven by new and increasingly demanding legislations. The UKs biggest Recycling exhibition RWM took place at the Birmingham NEC recently and the level of growth and activity throughout the industry was more apparent than ever, with both exhibitor and visitor numbers seeming at their highest for some years. Master Magnets were particularly pleased with the outcome of the show, having discussed many new projects more

Read More

Master Magnets Looks Ahead To RWM 2013!

In recent years, the RWM show has proved to be the most successful show on Master Magnet’s calendar and always promises to deliver a high number of quality visitors. This year at RWM, Master Magnets have opted to showcase their products on their largest stand to date. Located on the front aisle, near the main entrance (stand 17F19), the company will be demonstrating a range of metal separation and detection solutions that are commonly used for ferrous and non-ferrous recovery. An ‘Eccentric’ Eddy Current Separator will be shown separating non-ferrous particles from various more

Read More

Mastermag Return To PAWRS

The Plant and Waste Recycling Show returns to Paignton between the 11th and 13th of June and Master Magnets will be joining the long list of exhibitors to demonstrate their equipment on stand M6, near the Registration & Conference centre on the Middle Green. For Master Magnets, the recycling industry has seen steady growth over recent years but has started to show signs of some much more significant development these last few months. With this in mind, the company have planned to exhibit at PAWRS and RWM, followed by IFAT and Hillhead in 2014. Master Magnets PAWRS On stand M6, more

Read More

Mastermag Overbands Reduce Shredder Downtime & Repairs

Recovering Ferrous Metals from waste product streams has become more and more profitable over the last few years with the significant increase in the value of steel. Many of the UKs recycling centres have also been upgrading their metal separation equipment because of the potential savings that can be made from avoiding unnecessary landfill and protecting any downstream processing equipment from large damaging metals. Last year, Master Magnets were contacted by a large recycling company based in Lancashire that was having problems with large ferrous metals making their way into their more

Read More

Master Magnets Start 2013 With New Eccentric ECS Orders

Master Magnets finished off 2012 with a fantastic final month. Despite having just over three working weeks, December saw the company’s Metal Detection division have one of its most successful months of the year. Sales of the Magnetic Equipment, which included many more Overband Magnets and an Eddy Current Separator, then took the sales figures to a record high for a December month. Master Magnets have also had a great start to the New Year since returning to the office this week, with two of our customers placing orders for our latest ‘Eccentric’ Eddy Current Separators. In 2011, more

Read More

Master Magnets Supply Wet Drums To Australia

Trading to the global marketplace has always been a huge challenge for European companies, with exchange rates, shipping costs and lead times all having a significant effect on a company’s ability to remain competitive. To be considered as potential suppliers outside of the EU, manufacturers have to ensure that their equipment and services are far superior to those of the more local competitors, and in many projects this can be of much more importance to the end user. In addition, Davis Tube Tester’ was supplied. The Davis Tube Tester is used to evaluate magnetite, ferrosilicon and more

Read More

Master Magnets Help To Improve Nigerian Mineral Processing

Earlier this year, Master Magnets were contacted by SODEX Mines in Nigeria who specialise in the mining and processing of Columbite concentrates used in the manufacture of superconductive alloys. At that time, SODEX Mines were using some very old and outdated magnetic separators to process their material and were experiencing difficulties in upgrading their final product to the required levels. In addition to this, the worldwide demand for their product had been increasing significantly, urging their key decision makers to begin researching the latest mineral separation technologies more

Read More

Mastermag Boost International Brand

The European debt crisis has had a detrimental effect on the manufacturing industry recently. Having affected the majority of Europe’s countries, the financial downturn has lead to many companies having to put their projects on hold. Despite Europe’s troubles, Master Magnet’s equipment sales have continued to thrive with an ever-increasing amount of Magnetic Separators and Metal Detection equipment being sold to Asia, the Middle-east and Australasia. Recent international projects have included the manufacture of four Eddy Current Separators for an organic fertiliser process in more

Read More

Master Magnets Look To The Future

Having just posted some very impressive figures reflecting significant growth over the past twelve months, Master Magnets are planning further expansion for the coming year with the development of the Metal Detection brand and the investment into a new Apprenticeship programme. Master Magnets Ltd has offered the opportunity of Engineering Apprenticeships to two local young men. David Ingram and Ben Sullivan were the two successful candidates selected from the fifteen applicants provided by The Birmingham Metropolitan College. Both apprentices will spend time learning their trade alongside more

Read More