Fragmentiser Electro Magnetic Drum Separators are used to continuously remove ferrous metals from a product stream in applications such as municipal refuse and vehicle recycling plants.

These particular Drums are typically used where magnetic materials may be entrapped or buried beneath non-metallic materials. The Fragmentiser Drums are designed to allow extracted magnetic materials to roll over the face of the drum to release any non-metallic materials that may be caught between the ferrous material and the magnet.

ADVANTAGES OF MASTER MAGNETS FRAGMENTISER ELECTRO DRUMS

1. The axial pole design gives continuous high field strength at the separation zone. The effective magnet width is maximised thus ensuring even cover wear and minimum burden depth of material.

2. The bipolar alternate pole arrangement ensures a cleaner separation of ferrous and non-magnetic materials. This is because materials, which may be entrapped are allowed to roll over the face of the drum, helping to release the non-metallic materials from the magnetic materials being extracted.

3. The high intensity primary coil concentrates maximum flux at the point of extraction whilst the lower intensity secondary coil ensures that ferrous material is transported to the point of discharge.

4. Ducted coils give improved cooling, this results in a low winding temperature allowing higher intensity and a longer coil life.

5. Heavy Duty Construction ensures a long trouble free working life.

6. Wear covers 8mm thick minimum in manganese steel incorporate bolted joints for ease of cover replacement.

7. Cooper split bearings are used for ease of inspection and maintanence.